Bayplast Kalıp
Molds, 3D design & printing
Injection tooling, CAD design and printer prototypes — from sample to series under one roof.
Press line
From T0 to series on Yizumi
Sample parameters are recorded on the servo injection line so approved contract runs stay repeatable.
- Typical ~90–240 ton class
- PP / ABS / PC / PA and engineering resins
- Color and surface trials
- Mold and part under one roof
Services
What we build
Design, prototype and tool-to-series — one production line.
Mold making
Hot / cold runner, single and multi-cavity — P20 / 718 / H13.
3D design
CAD-CAM, DFM, cooling and ejection — STEP/IGS deliverables.
3D printing
FDM for fit, snap-fit and form checks before steel.
Plastic injection
T0 samples and contract runs on Yizumi with logged parameters.
CNC machining
Mold bodies, inserts and electrodes — 3+2 axis.
Mold maintenance
Flash, dim drift, EDM revision and re-approved T0.
Prototype / T0
First shots to approved sample — dims, surface, process card.
Shop floor
From tool to part under one roof
STEP to T0 sample, approval to series. PP, ABS, PC, PA and engineering resins.
Approach
Why Bayplast
Few promises, clear process — every step tied to manufacturability.
Manufacturability first
DFM, cooling and ejection solved in design.
Measurable samples
T0 parameters recorded; series stays repeatable.
One contact
Design, mold, print and injection in one shop.
Process
From quote to delivery
- 013D designSTEP / IGS, CAD & DFM
- 023D printingPrinter prototype
- 03MoldCNC, EDM, assembly
- 04T0 sampleDim & surface
- 05SeriesInjection & ship
Gallery
From the floor
Sectors
What kind of parts
Example work areas — customer names published with approval.
Automotive trim
Clips, covers, visible surfaces — multi-cavity ABS/PP.
White goods
Housings and lids; color sample, sink and weld-line control.
Technical housings
PA+GF, inserts, connector bodies — walls and cooling in DFM.
Consumer / electronics
Small enclosures, snap-fits, A-side cosmetics.
Industrial
Fans, grilles — glass-filled PP, long flow paths.
Medical-adjacent
Non-sterile housings; gate and surface notes logged.
FAQ
Common questions
What should I send for a quote?
STEP or IGS, resin (PP/ABS…), rough qty and a short note. Attach files via WhatsApp or email.
Does 3D printing replace the mold?
No — it validates form and assembly. Resin behavior is confirmed at T0.
Can you run our tool on contract?
Yes — after tonnage and mounting checks on the Yizumi line.
How do T0 revisions work?
Dim and surface notes are logged, cut into the tool, then series follows approved parameters.
Is hot runner always required?
No — volume, scrap and gate marks decide. See hot / cold runner.
Is there a quote checklist?
Yes — gather STEP, resin, qty on one page.
Which resins do you run?
PP, ABS, PC, PA and engineering grades — see the material table.
Blog
Technical notes
Deliverables
Typical delivery pack
Scope varies by job — written clearly in the quote.
Data
DFM note, approved 3D tool model, resin and tonnage advice.
Tool
Machined / assembled mold with cooling and ejection live.
Sample
T0 set, dim log, process parameters, revisions if needed.
Series
Approved contract lots or tool ship + process card.
Quote
Send your drawings
STEP or IGS — a short note is enough to start the quote.